磁力随钻测量磁干扰校正方法研究

2014年 42卷 第2期
阅读:141
查看详情
Method of Magnetic Interference Correction in Survey with Magnetic MWD
许昊东 黄根炉 张然 韦红术 程锋瑞
Xu Haodong Huang Genlu Zhang Ran Wei Hongshu Cheng Fengrui
中国石油大学(华东)石油工程学院,山东青岛 266580; 中国石油阿姆河天然气公司钻井部,北京 102206; 中海石油(中国)有限公司深圳分公司,广东深圳 518000
School of Petroleum Engineering, China University of Petroleum(Huadong), Qingdao, Shandong, 266580, China; Drilling Department, CNPC Amudarya Petroleum Company Ltd., Beijing, 102206, China; Shenzhen Branch, CNOOC, Shenzhen, Guangdong, 518000, China
为提高磁力随钻测量的井眼轨迹精度,研究了随钻测量磁干扰校正方法。利用随钻测量参数,计算井斜角、工具面角和方位角;采取360°旋转钻柱记录、分析径向磁力计读数的方法,纠正磁热点引起的径向磁干扰;采用循环迭代的方法,纠正钻柱磁化引起的轴向磁干扰。通过仿真测量参数、磁干扰数据和地磁参数,应用磁干扰校正方法计算得到校正方位角,并与实测方位角、真实方位角进行了对比,结果发现,在其他井眼参数保持不变的条件下,井斜角接近90°或方位角接近90°、270°时,实测方位角误差变大;井斜角接近0°或方位角接近0°、180°时,实测方位角误差变小;真实方位角为0°~180°时,实测方位角比真实方位角小,真实方位角为180°~360°时,实测方位角比真实方位角大;井眼轨迹接近水平东或水平西方向时,轴向磁干扰的校正效果最差。磁干扰校正方法能够提高方位角测量精度,减少无磁钻铤长度。
In order to improve accuracy of well trajectory measured by MWD,magnetic interference correction was studied.Inclination angle,tool-face and azimuth angle were worked out when surveying with magnetic MWD.Cross-axial magnetic interference originating from magnetic hot spots in the NMDC was corrected by rotating drillstring 360° and analyzing cross-axial magnetometer data.Axial magnetic interference originates from the magnetization of ferromagnetic portions of the drill string was corrected by loop iteration method.A series of conclusions were reached by a group of simulation data including survey data,magnetic interference data and geomagnetic parameters:the error of measured azimuth was larger when inclination approaches 90° or azimuth approaches 90°,270°;the error of measured azimuth was smaller when inclination approaches 0° or azimuth approaches 0°,180°;the measured azimuth was smaller than true azimuth when true azimuth was between 0° and 180°;the measured azimuth was larger than true azimuth when true azimuth was between 180° and 360°;the effect of correcting axial magnetic interference was poorer when trajectory approaches horizontal west or east and the correcting algorithm was stable.
径向磁干扰; 钻柱磁化; 轴向磁干扰; 方位角;
radial magnetic interference; drillstring magnetization; axial magnetic interference; azimuth angle;
中海石油有限公司科技攻关项目“陆丰低渗油气藏测试工程联作关键技术研究”(编号:CCL2012SZPS0005)资助。
https://doi.org/10.3969/j.issn.1001-0890.2014.02.020