论文详情
可控弯接头钻井工具的偏心机构控制仿真实验
石油钻采工艺
2017年 39卷 第6期
阅读：70
查看详情
Title
Simulation experiment on the control method for eccentric mechanism of the drilling tool with variable angle bent sub
Authors
ZHANG Guangwei
LIU Chang
Organization
Mechanical Engineering College, Xi'an Shiyou University, Xi'an 710065, Shaanxi, China
摘要
可控弯接头钻井工具的偏心机构控制方法决定着可控弯接头钻井工具的成败。对已提出的一种基于该可控弯接头钻井工具的控制方法进行了验证。通过Labview软件和SolidWorks软件联合仿真实验，并运用牛顿插值法，验证了在外套旋转和不旋转2种情况下，调整导向轴偏置角β公式的正确性，调整导向轴方位角θ公式的正确性以及调整导向轴偏置角β公式和调整导向轴方位角θ公式联合使用的正确性，并得到了各种情况下导向轴的运动轨迹，可为以后的研究提供参考。
Abstract
The success of the drilling tool with variable angle bent sub is dependent on the control method of its eccentric mechanism. The control method based on the drilling tool with variable angle bent sub was verified. Based on the simulation experiment of Labview and SolidWorks software jointly, the correctness of offset angle () and azimuth angle () adjustment formulas of the guide shaft and their joint application under two scenarios of sleeve rotation and non-rotation was verified by means of the Newton interpolation method. Besides, the moving path of guide shaft under various situations was obtained. It provides the theoretical basis for the future study.
关键词：
旋转导向钻井工具;
可控弯接头;
偏心机构;
控制方法;
仿真;
Keywords:
rotary steering drilling tool;
variable angle bent sub;
eccentric mechanism;
control method;
simulation;
DOI
10.13639/j.odpt.2017.06.012
论文详情