论文详情
BH-VDT5000垂直钻井系统在克深 203井的应用
石油钻采工艺
2012年 34卷 第4期
阅读:89
查看详情
Title
Application of the vertical drilling system BH-VDT5000 on Well Keshen 203
Authors
RU Dajun
ZHANG Jiangeng
ZHOU Shengpeng
MA Zhe
YU Haifa
HAO Nan
单位
渤海钻探工程公司工程技术研究院,天津 300457
Organization
Drilling Technology Research Institute of Bohai Drilling Engineering Co. Ltd., Tianjin 300457, China
摘要
油气井防斜、纠斜问题是钻井过程中普遍存在但一直未能彻底解决的难题之一。经过数年攻关,渤海钻探工程技术研究院研发了 BH-VDT5000垂直钻井系统,介绍了垂直钻井系统的结构、工作原理,并对垂直钻井系统在塔里木油田克深 203井的现场应用过程、效果进行了对比分析。垂直钻井系统在克深 203井用 2趟钻完成了二开井段,总进尺 1 558 m,正常钻进井段井斜控制在 0.5°以内,与同时使用 Power-V垂直钻井系统的邻井相比机械钻速提高 23%以上。现场应用证明, BH-VDT5000垂直钻井系统在高陡构造地层、逆掩推覆体地层的钻探中,防斜打快效果显著,可进一步推广应用。
Abstract
Hole slanting control has been one of the most remarkable difficulties. Through many years of research, the vertical drill-ing system, BH-VDT 5000, was developed. The structure, operational principle were introduced, and its application process and effect in Well Keshen 203 in Tarim oilfield were analyzed. The second section of Well Keshen 203 was finished in two runs using BH-VDT5000 system and the total footage was 1 558 m, and the inclination is controlled within 0.5 degree. Compared with the adjacent wells drilled by the Power-V vertical drilling system, the average rate of penetration was 23% higher. So the conclusion was that BH-VDT5000 sys-tem can promote the rate of penetration, shorten the drilling time and satisfy the requirement of slant prevention and fast drilling in high dip angle and thrust over nappe formation, therefore, it can be used further.
关键词:
垂直钻井系统;
高陡构造;
防斜打直;
塔里木油田;
Keywords:
vertical drilling system;
high dip angle structure;
slant control;
Tarim oilfield;