基于VB.NET和MATLAB 的三牙轮钻头仿真软件开发

Development of simulation software of three cone bit based on VB.NET and MATLAB

赵增强 况雨春 戚蒿 张天津

ZHAO Zengqiang KUANG Yuchun QI Hao ZHANG Tianjin

西南石油大学，四川成都　610500

Southwest Petroleum university , Chengdu 610500, China

随着钻井地层的日益复杂，对钻头结构的改进提出了新的要求。利用计算机仿真方法，在已建立的牙轮钻头几何学、 运动学模型和钻头与岩石互作用模型的基础上，通过MATLAB 编程，求解所建立的各模型。为了解决软件的运行效率及不易 操作的问题，采用了VB.NET 来编写界面。通过MATLAB 编译器将模型文件转化为.NET 组件（DLL 文件），与VB.NET 交互， 实现仿真软件的开发。利用该软件进行牙轮钻头破岩过程仿真可得到牙齿图形、任意时刻的井底模式及机械钻速等，对钻头的 优化设计有重要的指导意义。

With the further development of drilling engineering, new requirements on the improvement of the bit structure are proposed. In this paper, using the method of computer simulation, on the basis of the cone bit geometry and inematics models and the interaction model of bit and rock, the established models are solved through the MATALB programming. To resolve the problems of the running eficiency and the complex operation, VB.NET is used to compile the interface. The model ile is transformed into .NET component (DLL ile) through the MATLAB compiler, realizing the alternation with VB.NET and the development of the simulation software. By using this software to carry out the breaking rock process of cone bit simulation, the cutter bit igure, arbitrary bottom-hole pattern and drilling rate can be obtained. This is very important to the optimization design of bits.