高浓度聚合物驱提高采收率方法理论研究

Theory research on EOR method of high concentration polymer flooding

刘义坤 王福林 隋新光

LIU Yikun WANG Fulin SUI Xinguang

大庆石油学院“提高油气采收率”教育部重点实验室，黑龙江大庆　163318 大庆油田有限责任公司第一采油厂，黑龙江大庆　163001

Key Laboratory for Enhanced Oil and Gas Recovery of the Ministry of Education, Daqing Petroleum Institute, Daqing 163318,China No.1 Oil Production Plant, Daqing Oilfield Company Limited, Daqing 163001,China

高浓度聚合物驱作为常规聚合物驱后进一步提高采收率的方法，其提高采收率的幅度或取得的经济价值与井网、井距等均有密切的关系。利用数值模拟方法，通过对大庆油田中区西部葡一组进行精细数值模拟研究，对中区西部高浓度聚合物在不同井网、井距、不同注入速度以及不同注入浓度条件下的驱油效果进行评价及优选。结果表明：采用九点法、小井距、高浓度、高注入速度的开发方案，能够达到最优的开发效果。为现场开展高浓度聚合物驱提供开发依据。

High concentration polymer drive is a further enhanced oil recovery method after conventional polymer flooding.Its economic value depends on well pattern and well spacing. In this article, we evaluate oil displacement efficiency of highconcentration polymer at different well pattern, well spacing, injection rate and concentration by fine numerical simulation inPu-1 oil group of Daqing oilfield. Research shows that the development plan of nine point well pattern, dense well spacing,high concentration and high injection rate can achieve best development effect. This provides a basis for carrying out field highconcentration polymer flooding.