论文详情
靖平2井钻井技术
石油钻采工艺
2001年 23卷 第6期
阅读:79
查看详情
Title
DRILLING TECHNOLOGY IN WELL JINGPING-2
Authors
Wei Xiaozhong
Tan Ping
Xu Bo
单位
长庆石油勘探局工程技术研究院, 陕西西安 710021
西安石油学院, 陕西西安 710065
摘要
靖平2井是长庆石油勘探局独立完成的第1口水平井,由于该井优化井身结构,简化施工程序,造斜点低,靶前距短,水平段长,施工难度大,因此采用了防斜快钻技术。详细介绍了靖平2井的地质情况与井眼轨迹设计,斜井段轨迹控制方面的难点、要求和措施,给出了取得的技术成果和几点建议。
Abstract
Well Jingping-2 is the first horizontal well drilled by Changqing Petroleum Exploration Bureau independently. As this well has special casing program, low kick-off point, short distance of hitting target, and long horizontal interval, field operation is very difficult, and thus deviation control fast drilling technology is applied. The geological condition and well trajectory control, especially trajectory control in the deviated interval, its difficulties, requirements and solving measures are described in detail. The technical achievements in drilling this well, and some recommendations are also presented in this paper.
关键词:
水平井;
工程设计;
井眼轨迹;
导向钻井;
钻具组合;
Keywords:
horizontal well;
engineering design;
well trajectory;
navigational drilling;
bottom hole assembly;
DOI
10.3969/j.issn.1000-7393.2001.06.006