弯曲测线资料处理程序

A TRIAL ON SLALOM LINE DATA-PROCESSING PROGRAMME

弯曲测线资料处理程序,简称“S”程序,是为处理弯曲测线观测的野外资料而编制的.整个程序包括弯线处理要求的一些子块以及常规处理要求的一些子块.程序适用于150机,用的是150机器指令,除主机外,还使用了光电、觉行、A/D输入机、剖面显示仪等外围设备.现有程序处理100张野外带的一条弯线剖面大约需要用2—3小时.这分报告主要说明程序结构的设计思想和方法实现的数学模型,而没有涉及具体的机器指令.另外,报告还从处理的两条冲面的实例出发,对观测系统、地层倾角、速度等参数对于弯曲测线地质效果的影响进行了一些初步探讨,计算了一些临界数据;企图能给野外施工设计和处理参数的选取提供一些依据.

S " is the abbreviation for Slalom Line Data-Processing Programme which is worked out purposely for processing the data observed with slalom line. The programme as a whole consists of some blockettes as required in the processing of slalom line as well as in the conventional processing. The programme is available to computer-150 with the instructions of its own. Apart from the mainframe, the peripheral devices such as photoelectric tape reader (PTR), line printer and cross-section display unit etc. are used. Approximately 2-3 hours are needed to process slalom line sections of 100 field tapes with the programm on hand.This paper deals mainly with the guidelines for the design of the structured programme and the mathematical model which will put the method into effect, it does not touch upon the concrete machine instructions. Besides, from the existing examples of the two sections being processed, some tentative discussions concerning the influence of slalom line of the parameters such as layout ch tigraphical dip and velocity on geological interpretation effect were made. The critical data were calculated. The author hopes that it can be served as a scientific basis either for the design of field work or for the choice of processing parameters.